How is moisture controlled in tall towers?
Thread Content
A few days ago, we produced 25-10-16 at our high tower; in the first few days the moisture level was below 1.0, but now it’s around 1.1. Could it be that there’s a leak in the coiled tubes? How should I check it?
It’s the raw material issue; 1.1 moisture content is qualified anyway, right?
The moisture content of High Tower particles should be kept below 1.0
Normally, it is caused by high moisture content in the raw material water.
It’s probably a problem with the raw materials; 1.1% moisture level is still within the acceptable range, right? A few days ago, we were producing 25-10-16 in our high-altitude production facility, and during the first few days the moisture level was below 1.0%, but now it’s around 1.1%. Could it be that there’s air leakage in the coiling tubes? I guess I’m really stupid???? Ugh
http://blog.sina.com.cn/yuxuanbing123 Explains in detail how to control moisture and temperature; it also covers the control of fertilizer caking
All of us are below 0.6; it’s a bit higher in summer as the heating temperature of the raw materials is increased