Find a glue that can withstand over 100 degrees and 30% sulfuric acid
Thread Content
There is a corrosion experiment that needs to be carried out in 30% boiling sulfuric acid; I’m not sure what type of adhesive can be used to seal the samples in order to ensure their durability. Please help! !
The temperature isn’t low; if it’s sealed, I have a type of polymer material here that we could try.
Using fiberglass should be fine, but the resin choice needs to be correct. Feel free to get in touch if you want to discuss this; I’ll start working on building twelve similar reaction vessels in about ten days, and it will be even more challenging
Try using EPDM or fluororubber; both can withstand temperatures above 100 degrees. If necessary, wrap it with several layers of Teflon tape.