Kerosene product filter type
Thread Content
What type of filter is used from the jet fuel product storage tanks to the loading quay? Is it necessary to add a coalescing dehydrator?
The jet fuel coalescing dehydrator should be installed before the jet fuel enters the product storage tank. Between the product storage tank and the loading dock, a noise-suppressing, flow-stabilizing separator needs to be installed in front of the loading measurement device. Its functions are as follows: 1. To efficiently separate and remove the gas phase from the liquid phase of aviation fuel, ensuring that the actual volume of aviation fuel loaded matches the measurement data; this prevents the mixing of liquid and gas, which could result in an actual loading volume that is less than the measured value, leaving the tank incomplete and requiring reloading – thereby reducing the speed and efficiency of loading ； 2. The fluid flow is stable, with low noise; the metering device operates quietly and steadily, the failure rate of the equipment is significantly reduced, and the metering equipment has a long service life. Our Novel company uses patented technology to professionally design and manufacture this equipment. If interested, you can explore further at luoli519@163.com