Design of the sampling site on the device
Thread Content
The sampling points within the device need to be redesigned. Different sampling ports should be designed depending on the viscosity of the oil, and insulation measures also need to be taken into account. What aspects should be paid attention to? There is also gas sampling, such as hydrogen and hydrogen sulfide; in winter, areas where liquid may accumulate are prone to freezing. Thank you~
When designing sampling ports (points), the temperature and state of the medium are the first factors to consider!
Sampling method: Circulating backflow or direct discharge for waste removal. Sample type: Liquid or gas samples. Sample freshness: Samples that are representative can be collected from those points. Insulation, cooling, or heating is determined based on the physical properties required; this can be determined by referring to the process pipelines. Regarding the gas sampling tube, water accumulation in winter can cause blockages; it is recommended to install an additional small solenoid valve to perform regular purging, which will help prevent water accumulation. (You can discuss the specific details further.)