Filter washer water distribution box
Thread Content
The current design of the washing water distributor in the rotary table filter results in uneven distribution of the washing water; as a result, the filter cake is sometimes washed away from its proper position, which affects the washing process. I wonder if anyone has modified the washing water distribution box – could you share some ideas on how to do that?
A poor washing effect will certainly affect the filtration performance and phosphorus recovery rate. It is best to adjust the washing distributor on-site; the principle is that the washing should be even, with no filtrate present or any cracks appearing in front of the washing distributor.
The issue now is not the position of the wash water distributor; it’s its internal structure, which causes uneven distribution of the wash water within the distributor, resulting in uneven distribution of wash water as it exits the distributor
What is the general temperature for washing clothes?
A scale inhibitor can be used in the filtration system; otherwise, frequent scaling has a significant impact on production, leading to low yields and high consumption.