Specifications for stainless steel sheets
Thread Content
Is there a thickness specification table for 304 stainless steel sheets? I searched many places but couldn’t find it. Help needed.
Generally, they are even numbers such as 2, 4, 5, 6, 8, 9, 10, 12, 14, 16............... etc. You can ask the dealer for specific details.
The finished product is available in 20 and 22 mm thicknesses; I’m not sure what other thickness options are available. A cutting allowance of 1 mm should be sufficient.
You can check the regulations in GB/T708 and 709. The dimensions and allowable tolerances for cold-rolled and hot-rolled steel sheets are given above.
The widths I see most often are 1500, 1800, and 2000; the length seems to be customizable, with 6000 and 9000 being the common choices
Only the thickness specification is required. Length and width specifications are available; thank you all!
You can consult the relevant national standards. . . . . . . . . . . . . . . . . . . . . . . .
It’s really hard to find; to be more specific, it only indicates the range from certain millimeters to other millimeters, without specifying the available sizes in between. Are the larger sizes all in even increments?
Stainless steel plates are also available in 5mm and 15mm thicknesses; it’s not necessarily limited to even numbers
I also want to know for sure! It’s hard to say! I also chose the even numbers.