Which is better, Type B cushion or Type C cushion?
Thread Content
This post was last edited by flute6 on 2012-4-17 23:06. Which is better, Type B pads or Type C pads? Why?……Please have experts answer. Let’s talk about all the gaskets again; I wouldn’t be very grateful if…
Each one has its own characteristics. This site has many posts that provide information on gaskets; the poster can take a look at those posts by using the search function on this site.
I suggest you check HG/T20592-20615, as it contains detailed instructions. Additionally, for the gasket used in this tire, the name \"Sanzi Jing\" is chosen; you might want to look into that as well. I hope this will be helpful to you!
It is related to the type of flange sealing surface selected, and the specifications generally provide instructions on this.
It’s impossible to say whether it’s good or bad; it can’t be compared. Type B gaskets are generally used in flanges and valves with concave-convex sealing surfaces (MFM). Type C is used for flanges and valves with a raised face (RF) sealing surface.