Thread Content
Common causes of leakage in vertical multi-stage stainless steel centrifugal pumps. A common problem with vertical multi-stage stainless steel centrifugal pumps is leakage, and this issue causes a lot of inconvenience for users. The staff at Nanjing Youfu Pump Industry explain the common reasons for leakage in the following article, so that users can identify and locate the cause promptly and resolve the problem quickly. The technical guidance from Youfu Pump Industry indicates that common causes of leakage in vertical multi-stage stainless steel centrifugal pumps include issues with the installation of the mechanical seal, as well as problems with the installation of the O-rings on both sides of the pressure-resistant cylinder. By identifying the causes of leakage in vertical multi-stage stainless steel centrifugal pumps through inspection, specific corrective measures can be taken to resolve the issue successfully. General treatment methods: 1. The sealing surfaces of the multi-stage pump are uneven ； Methods for dealing with leaks in vertical multi-stage pumps: Improve the water pump or the medium, or replace the mechanical seal by using different model parameters for the multi-stage pump. 2. The multi-stage pump body has sand holes or is cracked ； Methods for dealing with leaks in vertical multi-stage pumps: Provide the model parameters of the multi-stage pump and replace its pump casing. 3. The mechanical seal of the multi-stage pump is worn out ； Methods for dealing with leaks in vertical multi-stage pumps: Adjust the friction position of the seal ring, remove the seal ring, and then reverse its orientation. If the tightening spring on the seal ring has lost its elasticity or is cracked, the spring can be removed and replaced with a wire of appropriate diameter to tighten it in place. 4. During the installation of the multi-stage unit, the bolts of the pump became loose. Method for dealing with leaks in vertical multi-stage pumps: Position the multi-stage pump so that it is facing forward, and slowly tighten each screw on the outer shell of the pump one by one; never try to tighten all the screws at once. The above covers the reasons for leakage in vertical multi-stage centrifugal pumps and the corresponding solutions. Due to the limited expertise of the author, if you wish to obtain a more detailed understanding of this product, you can consult the customer service online. Youfu Pump Industry is a global manufacturer of pump products and systems. We offer advanced products, services, and solutions to meet your diverse needs. Driven by a commitment to innovation, Youfu is dedicated to continuous improvement of water pump technologies, products, and solutions.