Selection of pumps for extracting liquid materials from barrels
Thread Content
This post was last edited by Chen Shixing on 2021-3-23 at 15:09. Guys, I need to transfer the materials in barrels onto a platform that is 7 meters high. The specific gravity and viscosity of these barrelized materials are similar to those of water; each barrel weighs around 200 Kg, with a diameter of about 5 cm, and there are two openings per barrel. To ensure complete transfer, it’s inevitable that the machinery will run idly sometimes. The gear pump we are using now starts leaking after just 3 days of use; I earnestly ask experts to recommend a suitable pump. I hope the experts will not hesitate to share their insights: lol:lol. Thank you in advance!
Magnetic drum self-priming pump; contact details are listed in the signature.
Can a self-priming pump run dry? To remove the materials completely, idling is inevitable. If possible, could you provide a model of a pump?
Can a magnetic drum pump run idle? To remove the materials completely, idling is inevitable. If possible, could you provide a model of a pump?
There are specialized chemical transfer pumps, available in electric and pneumatic versions; they can be used for pumping acids, alkalis, and solvents, and they are easy to use, safe, and leak-proof