【Daily Question】Principles of Chemical Engineering 145: Water Vapor Partial Pressure in Air (August 18)
Thread Content
The last edit to this post was made by Zaihui Kangqiao on 2015-9-22 at 10:51. The Chemical Engineering Theory section is now launching a \"One Question per Day\" activity aimed at helping everyone reinforce their basic knowledge in chemical engineering. Subsequent series such as \"Chemical Engineering Principles\", \"Mass Transfer and Separation\", \"Chemical Engineering Thermodynamics\", and \"Chemical Engineering Processes\" will also be introduced. We hope for your active support! Answers to the questions in the \"One Question per Day\" activity can be viewed directly, and the thread will be closed after 1 day! ! Participation earns 2 wealth points, with an additional 3 wealth points for correct answers~~~ Short answer: When the total pressure of air is 0.1 Mpa and the air temperature is below 100°C, the maximum partial pressure of water vapor in the air should be ____________________. The saturated vapor pressure of water vapor at this temperature
When the total pressure of air is 0.1 Mpa and the temperature is below 100°C, the maximum partial pressure of water vapor in the air should be the saturated vapor pressure of water vapor at that temperature.
It’s the saturated vapor pressure of water at that temperature, I guess
The saturated vapor pressure of water vapor at this temperature
The saturated vapor pressure of water vapor at this temperature.
When the total pressure of air is 0.1 Mpa and the temperature is below 100°C, the maximum partial pressure of water vapor in the air should be ________, while the saturated vapor pressure at that temperature is __________.
0.1 MPa. . . . . . . . .
The saturated vapor pressure of water vapor at this temperature
Don’t know how to solve it, want to see the answer: Q
Answer: The saturated vapor pressure of water vapor at that temperature.
Add two more characters: infinite _ close to 100℃_