Increase in conversion rate
Thread Content
How can the conversion rate of the 70m3 reactor be improved?
Increase conversion rate: 1. Extend the reaction time to reduce the pressure at the end of the reaction to a set high level. 2. Adjust the water-oil ratio appropriately and increase the amount of monomer added.
Increase conversion rate: 1. Extend the reaction time to reduce the pressure at the end of the reaction to a set high level. 2. Adjust the water-oil ratio appropriately and increase the amount of monomer added.
The conversion rate has little to do with the size of the reactor; it is only related to the process conditions
As the conversion rate increased, the quality metrics also changed. Is it to increase productivity? I don’t understand what you mean
It is to increase production and improve the conversion rate
This can be quite complicated, involving raw materials, the quality of additives, mixing ratios, process conditions, and so on.
A simple method is to close the circulating water valve once signs of pressure drop appear toward the end of the reaction, in order to raise the pressure in the polymerization reactor again. However, for the polymerization reaction, it’s not true that the higher the conversion rate, the better; 85%-90% is the optimal level
Should we increase the output per reactor or the total daily output? ?
Agreed! However, the conversion rate is related to quality, so it is important to pay attention to process control.