【Q&A Question 037】2016.05.27
Thread Content
【Q&A Question 037】May 27, 2016: What are the steps to start a corrosion inhibitor pump? The answer key will be available after responding; scoring is based on answering the key points. Ensure that the inlet and outlet valves of the corrosion inhibitor pump are fully open, set the flow rate of the corrosion inhibitor pump to zero, start the pump, and then adjust the flow rate to an appropriate level.
The slow-release agent pump is a screw pump; open the inlet and outlet, install a safety valve, and start the machine
Open both the inlet and outlet, then start the pump
Open the inlet and outlet valves to vent the filling pump
Open the inlet and outlet valves, press the button, and adjust the stroke.
Ensure that the inlet and outlet valves of the corrosion inhibitor pump are fully open, set the flow rate of the corrosion inhibitor pump to zero, start the pump, and then adjust the flow rate to an appropriate level.
Open all inlet valves, set the dosing range of the corrosion inhibitor pump to zero, start the pump, and then adjust the range to the appropriate value.
1. Open the inlet and outlet valves, verify that the downstream flow path is unobstructed, adjust the flow rate to the minimum level, and activate the safety valve and the outlet pressure gauge!
Set the corrosion inhibitor pump range to zero, start the pump, and then adjust the range to an appropriate value.