Valve selection for the flashing process
Thread Content
The reaction pressure before the control valve needs to be controlled, and flashing occurs after the valve; what type of valve should be used? Back pressure valve or control valve?
Use a self-acting pressure regulator to stabilize the pressure before the valve
The reaction pressure is 16 MPa, and the temperature is 100°C.:
The reaction pressure is 16 MPa, and the temperature is 100°C.:
The reaction pressure is 16 MPa, and the temperature is 100°C.:
So the pressure before the valve needs to be stabilized at 16 Mpa?
The pressure is too high; I’m not sure whether a self-acting pressure relief valve is a good choice or if a control valve would be better
A self-acting pressure regulator will also work; find a manufacturer specialized in this type of product, and it will be able to meet the pressure requirements
Yeah, isn’t it surprising:lol