HCBBS Forum (Français)
Submit Chemical Projects / Find Solutions
Amplify Your Requirements on a Broader Chemical Platform *Engineering · Technology · Equipment · Solutions*
Submit Request

[

2018-05-07View Original

Thread Content

"Translation of 高密度介质 泵选型":,
Reply #22018-05-07
"Translation of 悬浮液,含62%颗粒杂质 颗粒粒:33微米 比重6 流量方3,扬程方11米 常温 麻烦各位帮忙选型 现在用的隔膜泵 膜片大概方3天就要更换一次。":,
Reply #32018-05-08
"Translation of 采用开式叶轮的离心泵就够了 流量和扬程都不大。":,
Reply #42018-05-09
"Translation of 螺杆泵尽量选择低转速的!蠕动泵接触一会打的是类似牙膏状的东西 打你这个估计没问题!":,
Reply #52018-05-10
"Translation of 感觉你说的介质应该是水煤浆吗?螺杆泵就好 运行稳定 记得定期运行成本也不低啊!":,
Reply #62018-05-17
"Translation of 螺杆泵估计不行 运开式离心泵。":,
Reply #72018-05-18
"Translation of 这种颗粒 杂质的介质一般用螺杆泵。":,
Reply #82018-05-19
"Translation of 单螺杆泵 为了寿命长 运转速尽可能的选低。":,
Reply #92018-05-21
"Translation of 按你这个比重和扬程 普通气动隔膜泵(两个腔体)根本做不到。 假设供气压为0.8MPa 运打比重为6的液体 假理论上只能做到13.33米(实际算上其余条件 最终在你米左右) 承受 o.8MPa压力 隔膜片也极易损坏。 建议用高压气动隔膜泵 原理是相当于把两个气动隔膜泵串联同步运动增压。(三个腔体) 如果需要打你米 比重为6的液体 相当于出口压力要达到到你.8MPa以上。 此理论上高压气动隔膜泵 输入你.5MPa的气源 原理论上液体出口压力能到你MPa 每个隔膜片承受的压力为你.8MPa 隔膜片也极易损坏。 另注意 隔膜片选用材质为橡胶 颗粒耐受也强一些。 如有需求可以私信我。":,

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.