["redniy katalizatornyy oleogzhnyyy vagonnyy uzhavar,elniklina,,nlina,Dl,lina,llinaDllinaDllinaDllinaDllinaDDllinaDllinaDDlllinaDDllinaDDllinaDDllinaDDllinaDDllinaDDllinaDDllinaDDllinaDDllinaDDllinaDDllinaDDllinaDDllinaDDllinaDDllinaDDlllllllllinaDlllinaDDllinaDDlllllllllllllllllllllinaDllllllllllllllllllinaDDllinaDDlllinaDDllinaDDllllllllinaDDDlllinaDDDDlllllllllllDllllinaDDDDlllinaDDDDllllllllllllinaDDDDllinaDDDDllinaDDDDlllllDllllinaDDDDllinaDDDDllinaDDDDllDlllllllDllDlllllllllllllllllllllllllllllllllllllllllllllllllllinaDDDDlllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllDlllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllDDllllllDDlllllllllllllllllllllllllllllllllllllllDl
Thread Content
如题：催化油浆蒸汽发生器内漏，切除交付检修，大家谈谈都是怎么做的？
乌石化的事故总结看明白了。就知道了
无论是什么工作，在交付施工队或者自己 的维修人员前都要确保里面没有压力 介质已经排空，里面没有压力 吹扫置换合格
我们四根汽返线都有压力表，而且两根降液管有导淋，每次都是确认四个压力表没有压力显示，两个导淋没有介质，然后油浆线加盲板后开始检修。
没有压力表的，表示活不好干，所以就发帖学*学*。
两侧系统没有压力表，压力无法监测，吹扫置换涉及介质较多，易发生窜料危险。
没有压力表也没有关系啊 在你吹扫油浆管程的时候壳体的放空肯定是要打开的 这样检查看一下是否蒸汽、水阀门是否泄漏
乌石化的事故我一直在关注，但是很多疑问都想不明白，网上说是压力没有泄放，可是为什么没泄漏呢？事发时DOS显示22公斤蒸汽压力这是真的吗？现场没有火花不是火灾爆炸，会是大家分析的那样闪爆吗？各种物料泄漏乱窜，据说没有吹扫……