Purification Technology Edition Daily Question (Short Answer) [2018-2-14]
Thread Content
What should be noted during the methanol cooling process of the system? _?
Put the liquid level of the ammonia cooler under automatic control to regulate the cooling rate at 1-2°C/h, with a maximum of no more than 5°C/h. At the same time, pay attention to the pump filters to prevent blockages. At the same time, nitrogen is continuously introduced to prevent a drop in pressure.
Put the liquid level of the ammonia cooler under automatic control to regulate the cooling rate at 1-2°C/h, with a maximum of no more than 5°C/h. At the same time, pay attention to the pump filters to prevent blockages. At the same time, nitrogen is continuously introduced to prevent a drop in pressure.
Put the liquid level of the ammonia cooler under automatic control to regulate the cooling rate at 1-2°C/h, with a maximum of no more than 5°C/h. At the same time, pay attention to the pump filters to prevent blockages. At the same time, nitrogen is continuously introduced to prevent a drop in pressure.
Put the liquid level of the ammonia cooler under automatic control to regulate the cooling rate at 1-2°C/h, with a maximum of no more than 5°C/h. At the same time, pay attention to the pump filters to prevent blockages. At the same time, nitrogen is continuously introduced to prevent a drop in pressure.
Put the ammonia cooler level under automatic control to regulate the cooling rate at 1-2 degrees per hour, with a maximum of no more than 5 degrees; at the same time, pay attention to the pump’s filter to prevent clogging. At the same time, nitrogen is continuously introduced to prevent a drop in pressure.
Put the liquid level of the ammonia cooler under automatic control to regulate the cooling rate at 1-2°C/h, with a maximum of no more than 5°C/h. At the same time, pay attention to the pump filters to prevent blockages. At the same time, nitrogen is continuously introduced to prevent a drop in pressure.
Put the liquid level of the ammonia cooler used to cool methanol under automatic control, adjusting its cooling rate to 1–2°C/h, with a maximum of no more than 5°C/h; at the same time, make sure that the filter screens of the pump are not clogged. And nitrogen is continuously pumped in to prevent a drop in pressure.
Put the liquid level of the ammonia cooler under automatic control to regulate the cooling rate at 1-2°C/h, with a maximum of no more than 5°C/h. At the same time, pay attention to the pump filters to prevent blockages. At the same time, nitrogen is continuously introduced to prevent a drop in pressure.
Put the liquid level of the ammonia cooler under automatic control to regulate the cooling rate at 1-2°C/h, with a maximum of no more than 5°C/h. At the same time, pay attention to the pump filters to prevent blockages. At the same time, nitrogen is continuously introduced to prevent a drop in pressure.