Thread Content
This post was last edited by mike1005 on 2026-6-6 23:48. Over 60,000 plastic grade property tables available for free download. On the left side of the Aji Materials Database website at www.ajieng.com, it is also possible to apply additional search filters for material selection: 1. Type 2. Manufacturer 3. Reinforcement filler percentage 4. Product properties 5. Regulatory certifications 6. Physical properties – density, specific gravity, MFR, MVR, shrinkage rate, water absorption rate. 7 Mechanical properties – Tensile strength, tensile modulus, bending strength, bending modulus, etc. 8 Impact properties – Charpy notched beam, Charpy unnotched beam, Izod notched beam, Izod unnotched beam 9 Thermal properties – Heat distortion temperature (HDT), Vicat softening temperature, Relative Temperature Index (RTI), specific heat capacity, linear expansion coefficient (CLTE), melting temperature (Tm), thermal conductivity, ball indentation temperature 10 Flame retardant and fire resistance properties – UL fire rating, Oxygen Index (LOI), Glow Wire Flammability Index (GWFI), Glow Wire Ignition Temperature (GWIT) 11 Electrical properties – Volume resistivity, surface resistance, dissipation factor (DF), Comparative Tracking Index (CTI), insulation strength, arc resistance, High Voltage Arc Tracking Rate (HVTR) 12 Hardness properties – Brinell hardness, Rockwell hardness L, Rockwell hardness M, Rockwell hardness R, Shore hardness A, Shore hardness D, ball indentation hardness 13 Optical properties – Transmittance, haze, refractive index, reflectance, gloss, optical density (OD), Abbe number