Is there more ammonia plus corrosion inhibitor plus ten-water compound, or more organic amine for neutralization and as a corrosion inhibitor?
Thread Content
Currently, we inject ammonia water, corrosion inhibitors, and soft water, but the results aren’t very good. I’ve heard that many people now use organic amine corrosion inhibitors along with soft water – what are the effects of that? Let’s discuss it together.
What PPM do you specify? You use liquid ammonia; for corrosion inhibitors, a concentration of around 30PPM should be sufficient. What is the level of iron ions? Is the chloride content in your raw materials high?
Few people use ammonia water these days; it’s difficult to control, and it can easily cause corrosion of ammonium salts downstream
Right now, there is too much water added to the neutralizing corrosion inhibitor
Ammonia injection can cause many other syndromes. These days, neutralizing agents and corrosion inhibitors are generally used, with the dosage adjusted according to the iron ion concentration in the water you deal with. Moreover, this neutralizing corrosion inhibitor varies from one manufacturer to another; it is necessary to analyze the water sample before adding it. Q774366495
Note that the neutralizing and corrosion-inhibiting agents should be of better quality, but it is essential to carefully check the main components of the neutralizing agents produced by the manufacturer