Cyclone separator pressure drop
Thread Content
If the amount of steam injected into the reaction is increased, will the pressure drop in the settler and cyclone separator increase or decrease?
1. The gas phase inside the settler is affected by various factors, and the pressure drop in the cyclone separator is also influenced by many factors; therefore, to determine the trend of change in a particular parameter, it is necessary to keep other parameters constant. 2. When other parameters remain unchanged, an increase in the amount of stripping steam corresponds to an increase in the volumetric flow rate entering the cyclone separator, and the pressure drop increases as the flow rate rises. 3. With other parameters constant, an increase in the density of the fluid medium will lead to a higher cyclone pressure drop; whether the injection of stripping steam dilutes or increases the density of the oil and gas depends on the user’s assessment based on the physical property data. 4. Taking all these factors into account, a qualitative description can be given theoretically, but only when the proportion of stripping steam relative to the oil and gas is high will significant changes occur
Increasing steam injection reduces the oil and gas partial pressures
It goes up; the original poster can figure it out by doing the calculation