Are many rich gas compressors equipped with 3C control?
Thread Content
Are rich gas compressors often equipped with 3C control? Does your equipment use 3C control, and what are the advantages of using it?
The 3C system essentially operates in a borderline manner by reducing the surge margin of the press further. It is beneficial for reducing the energy consumption of the device. It is still possible if the amount of rich gas remains normal and stable.
The continuous reforming booster uses a 3C control system, which works very well; during one operating cycle after it is put into use, almost no human intervention is required. The downside is that frequent speed adjustments can lead to leakage in the packing seal of the turbine’s main steam valve.