What are the set values for the circulation water pressure and temperature in your system?
Thread Content
What are the set values for the circulation water pressure and temperature in your system?
We have control parameters: pressure around 0.5 MPa and temperature below 26°C, but this requires control by the power plant; if these parameters are exceeded, we have to call the power plant to make adjustments
0.4MPa 33 degrees Celsius
0.4MPa 33 degrees Celsius
0.4-0.5MPa 28-32℃
Feed water temperature: 20°C, pressure: 0.45 Mpa; return water temperature: 40°C, pressure: 0.4 Mpa
Feed water temperature: 26–32°C, pressure: 0.45 Mpa; return water temperature: 38°C, pressure: 0.4 Mpa
The circulating water pressure should be above 0.3 MPa, and the inlet water temperature should be below 23 degrees Celsius
0.45MPa，32℃
Inlet device pressure: 0.45 MPa, temperature: 28 degrees； Device outlet pressure: 0.4 MPa, temperature: 37 degrees
Is yours a bit low? Don’t you have many devices?