Water consumption per ton in refining and chemical enterprises
Thread Content
The water consumption per ton of crude oil processed by refining companies – many companies are now able to reduce this figure to below 0.5 tons per ton of crude oil. What is your company’s level in terms of water usage? Are there any effective measures for saving water?
Many will likely fail to reach 0.5, as this is the strict standard for new installations and applications for crude oil quotas. Reuse of the purified water obtained through wastewater stripping; reuse of water from wastewater treatment plants; recovery and hierarchical utilization of condensate water; descaling using recycled water in power generation; high-efficiency strainers; recovery of all recyclable waters such as drain water from steam drums and cooling water for pumps, etc
If wastewater is reused, a closed-loop water system can achieve this
Reuse of reclaimed water or wastewater is necessary to meet the standards.
Is the cost of using reclaimed water higher than that of using fresh water?
When two evils exist, choose the lesser one{:3_65:}