Continuous reforming catalyst addition
Thread Content
When UOP continuous reforming is operating normally, what determines when catalyst should be added? Are there any indicators, such as level? Thank you!
During normal production, addition is carried out based on the level of material in the separation hopper (for example, when the level is below 30%). UOP has specific requirements regarding the amount of gas used for washing; the catalyst should account for 30–40% of the total dust volume. If more catalyst is used for washing, the interval between additions will be shortened.
It is added based on the material level in the separation hopper
For us, it is sufficient to maintain the level in the feed hopper for the raw material at around 25