Treatment to reduce the properties of raw materials
Thread Content
Once the properties of the raw materials become lighter, it leads to a reduction in the amount of green coke produced. The temperature rises again and then falls again; at the same time, it is necessary to ensure that the steam generation capacity of the facility is not significantly affected. How should adjustments be made in such situations?
Appropriately increase the processing volume; do not reduce the stripping steam to increase raw coke.
Increasing the slag mixing ratio in the feed means that burning oil will be injected into the regenerator
The processing capacity has increased, so the oil dosage ratio has decreased as well. With the increase in processing capacity, isn’t it necessary to increase the stripping steam?
To maintain a constant gas production rate, the external heat load cannot be reduced; therefore, it is understandable that the regenerator must ensure an adequate amount of carbon. Does the stripping steam need to be adjusted frequently? Saving a little bit of steam doesn’t make much difference
Increase the reprocessing volume to boost the amount of raw coke produced
By keeping the reaction temperature constant, the reagent-to-oil ratio will not decrease. The stripping steam generally does not need to be changed