Purpose of calibration and calibration procedures for the separation hopper and lock hopper in UOP’s catalyst continuous regeneration system – thank you! ! !
Thread Content
Purpose of calibration and calibration procedures for the separation hopper and lock hopper in UOP’s catalyst continuous regeneration system – thank you! ! ! In particular, I’m interested in the difference between the first calibration when operations start for the first time and the recalibration that takes place during shutdown for maintenance. Thank you
Not many details have leaked out~~~
It is indeed quite difficult to find. Thank you for your reply; I’ll keep waiting!
You can try searching on various websites and different cloud storage services to see if you’re lucky~~~
This method is described in UOP’s manual; it is primarily used to calibrate the catalyst circulation rate, that is, the amount delivered per cycle. For example, the data set points for starting and stopping the level gauge in the locked area include checks on the activation of the upper and lower balance valves. There is a small trick, which is usually carried out by UOP during startup.