Issues to consider in the refining of Saudi mixed crude oil
Thread Content
Saudi mixed crude oil, mainly consisting of Saudi Light, Saudi Medium, and Saudi Heavy in a 1:2:2 ratio. Please share any issues that arise during refining; I’d like to use that as reference
I’m here to contribute my thoughts and inspire further discussion. Since our factory does not process Saudi crude oil, we can only offer some suggestions based on our personal understanding. I think when blending crude oil for atmospheric and vacuum distillation, what needs to be considered are the yields of various components, the corrosion impact on equipment, and the effectiveness of various anti-corrosion additives. I hope this helps the original poster.
What’s special about Saudi Arabia? Before processing, estimate the yields for each side stream based on an evaluation of the crude oil, and take into account the capacity of various pumps. During processing, attention should be paid to processes such as electrodesalination, heating furnaces, and atmospheric distillation, as well as to corrosion prevention measures. It is best to make these estimates beforehand, so that any issues can be addressed promptly during processing.
The sulfur content is quite high, and the acid value is also not low