Large-scale wax oil circulation
Thread Content
Experts, what is the role of the large wax oil circulation system when a vacuum distillation unit is put into operation?
Please explain clearly, what is the large-scale circulation of wax oil?
It should be that at the initial start-up of the installation, diesel or wax oil was used in a large-scale circulation to test the instrumentation equipment as well as the sealing performance of various flanges.
I have a shutdown in diesel intermodal transport here; as for your wax oil intermodal transport, I’m not sure why it’s the case.
Run a large cycle with diesel or paraffin oil to remove the light components from the device, thereby enhancing safety during maintenance
I feel that whether it’s a crude oil cycle, a diesel cycle, or a wax oil cycle, the functions are basically the same: 1. Adjusting instruments (such as control valves, level gauges, thermometers, flow meters, etc.) and other equipment components； 2. Check the sealing performance, flanges, gaskets, etc ； 3. Carry moisture in the device to ensure smooth operation (the device will contain a certain amount of moisture after maintenance) ； 4. Dispel gases to ensure the safety of crude oil during heating.