Clogging of the wet air-cooling inlet pipe
Thread Content
The inlet branch pipe of the wet air cooler, which has been in use for two years in the atmospheric and vacuum distillation process, became clogged. After cleaning it and opening it up, it was found that the blockage was quite severe. Once the cleaning is complete, how can the inside of the air cooler tubes be cleaned?
Dissolve and soak in hot water, working backwards through the process. If it doesn’t work, there’s only the high-pressure water gun to use.
Chemical soaking method, physical method. I don’t know what is blocking it; please clarify.
I soaked it in softened water; now I’m about to drain the water and use steam for infrared treatment to see if the rest is unobstructed