Inspection for violations at construction sites (Phase 2, 2018.09.15)
Thread Content
Inspection for violations at the construction site (Phase 2, September 15, 2018): 1. There are many violations at the construction or production sites, which hinder stable and safe production. We ask everyone to point out the issues shown in the images so as to help them improve their work. Thank you for your participation and support! ! ! Reference answers: 1. No safety belt was used during work at heights. 2. The platform lacked protective fencing. 3. The walkway planks were not fully installed. 4. The walkway planks were not secured properly. 5. No warning lines were set up to demarcate the work area. 6. There were people standing below the work area. 7. There was no supervisor present. 8. The platform did not have toeboards
Seat belt not worn or properly fastened, goggles not worn, platform not set up, installation area not isolated, wires in disarray
Safety belts were not used as required, the scaffolding was not secured, and there were no warning signs for simultaneous operations
1. Improper use of seat belts； 2. The seat belt should be worn high and low ； 3. No effective safety measures for concurrent operations – no measures to prevent falling of equipment, etc ； 4. During lifting operations, people should not be below the load, and no one should stand on the pipeline without proper safety measures in place ； 5. The tray plates are not fully laid out nor tied down, and the diagonal braces of the scaffold have fallen off ； 6. There are items such as water cups at the work site, which do not meet occupational health requirements ； 7. The on-site electrical equipment lacks protection against water exposure ； 8. The cables and air pipes at the site are intertwined and knotted, with no effective protective measures in place ； 9. No electrical control switch was seen at the site.
The seat belt on me isn’t working.
One person is not wearing a safety helmet or work clothes
The seat belt was not used properly； The work platform has no fencing ； There is no protection for cross-operation.......
1. The scaffold lacks mid-railings and toe boards. 2. Safety belts are not worn, and 5-point safety belts are not used. 3. There are flammable materials on site
The person on the pipeline cannot see the safety rope； There is no supervisor under the ladder ； The welding machine is too close
1. The scaffolding for the feet does not meet the requirements; there are no handrails. 2. Safety belts are not worn, making them a mere formality. 3. Multiple levels of work are carried out at the construction site without any protection. 4. There is no supervision at the construction site. 5. There are no fire-fighting equipment on site. 6. The electrical wiring at the site is in disarray