Check Violations by Image (2018.10.09 – October, Issue 1)
Thread Content
This post was last edited by “Hasty Passerby” on October 9, 2018, at 13:39. “Identify violations by looking at pictures” (October 2018, Issue 1). Instructions: 1. At construction sites or production facilities, there are many instances of rule violations, which is detrimental to stable and safe production. We hope that everyone can point out the problems shown in the pictures, so as to help them improve their work. Thank you for your participation and support! ! ! Reference answers: 1. Some people were not wearing safety helmets. 2. The materials being transported were wider than the vehicle’s width. 3. The workers’ work clothing was not in order. 4. They were not wearing protective gloves. 5. There were debris under the wheels
1. The workers were not wearing work uniforms； 2. No safety helmet worn ； 3. No protective equipment such as gloves ； 4. Excessive width of objects being transported by vehicle ； 5. If there are no safety warning signs or barriers in the construction site, unauthorized persons should be prohibited from entering the site ； 6. There are no supervisors on site.
1. Some loading and unloading workers were not wearing safety helmets. 2. The loading and unloading workers were not wearing gloves or work shoes. 3. There were no measures in place to prevent steel materials from slipping. 4. No warning area was established at the work site
1. No safety helmet worn； 2. Not wearing a long-sleeved work uniform ； 3. There is no warning line ； Mainly here to learn* a bit :)
Safety helmet not worn properly, incorrect vehicle selection, improper handling of goods
Too long, too wide, cannot be secured.
1. Some loading and unloading workers were not wearing safety helmets. 2. The loading and unloading workers were not wearing gloves or work shoes. 3. There were no measures in place to prevent steel materials from sliding. 4. No warning area was established at the work site
There were no supervisors at the site, nor were any warning ropes in place. Some workers were not wearing safety helmets, protective shoes, or work uniforms; the vehicles lacked anti-slip mats, and the workers involved in the tasks were not wearing gloves or other protective gear.
1. To wear a safety helmet properly, do not leave it lying around carelessly； 2. Tools are left scattered at the site ； 3. The vehicle does not have anti-slip measures; using a broom to prevent slipping is not reliable ； 4. Not wearing work clothes or protective gloves ； 5. The trough box is too long; the loading vehicle does not meet the requirements, making it impossible to secure it ； 6. No vehicle explosion-proof cover visible ； 7. The drivers all went to help load the goods ；