How to address poor water quality at the inlet of industrial high-purity water equipment

Thread Content

　　Solutions when the turbidity and sediment content of the water supply used by ultra-pure water equipment are high: In some areas, the water supply contains a large amount of sediment and has high turbidity; if standard equipment is to use such water as its input source, it is necessary to install a backwashing system to ensure that the turbidity of the incoming water does not exceed certain limits, so as to allow the equipment to operate properly. 　　The backwash system is equipped with high-quality quartz sand and activated carbon, which can more effectively absorb sediment, rust, and particles; this prevents such particles from clogging the instrument’s water inlet system and ensuring its proper operation. 　　When the backwashing system has absorbed particles to a certain extent, it can be backwashed to remove those absorbed particles, which are then discharged through the wastewater outlet. This helps to save costs associated with frequent replacement of consumables. Depending on the amount of water supplied to the instrument, glass tanks of different sizes can be used to ensure a sufficient and stable water supply.