Calculation of fire water volume for factories
Thread Content
The fire water consumption in a factory, according to the standards, is: outdoor V1 + outdoor V2. When a system protects multiple buildings, calculations need to be performed separately and the highest value among them is taken; it is not the sum of the maximum outdoor and indoor water usage amounts. How to understand it? Thank you!
The water consumption for the factory’s fire protection system is calculated by adding the values of outdoor V1 and outdoor V2. When a system is required to protect multiple buildings, it is necessary to calculate the fire water demand for each building separately, and then take the highest value as the total fire water demand for the system. It should be noted, however, that what is referred to here is the amount of water required for firefighting outdoors, and it is not simply the sum of the maximum water usage indoors and outdoors. This is because the calculation rules and requirements for fire water usage indoors and outdoors may differ, so they need to be considered separately