Take a look at the “cutting-edge technology” on this device: 91 – the extremely practical “instant chain connector””
Thread Content
In tasks such as the inspection, maintenance, and construction of chemical processing units, there are many welds on pipes with a diameter of 6 inches or less, and the number of such welds is substantial. The precision required for aligning these pipes is high, which means it takes a long time to complete these tasks. Today, we would like to recommend a handy tool that is easy to use – the \"Instant Chainer\". For more cutting-edge technologies, please visit: Check out the “Cutting-Edge Technologies” series on the site https://bbs.hcbbs.com/thread-3056492-1-1.html
This post was last edited by The wise on 2024-10-18 at 12:25. Case: CNOOC Engineering Zhuhai Module Construction Base. There were previously many welds on pipes with a diameter of 6 inches or less, and the large number of such tasks required high precision in alignment; it took a long time to complete them. Guo Zhaoxiang invented a simple-to-use \"instant chain device,\" which allows for quick pipe alignment. As a result, the efficiency of pipe alignment has increased by 30%, achieving both speed and quality.
The steps are as follows: 1. Insert the V-shaped clip at the bottom of the pipeline, and rotate the bolt to adjust the length of the chain； 2. Then place components such as elbows and flanges ； 3. Level the upper part and fix it with spot welding.