Issues related to natural gas purification. Please ask the expert to explain
Thread Content
After acid removal in natural gas purification, molecular sieves are used to absorb the moisture present in the gas. I know that 3A-type molecular sieves are used for this purpose, but I’m not sure how to calculate the size of the adsorption towers or determine the required quantity of these molecular sieves. There is also heating regeneration, just as definitely as cooling
When selecting the type and determining the number of molecular sieve adsorption towers in the natural gas purification process, the following factors need to be considered: 1. The flow rate and composition of the feed natural gas, including the water content and levels of other impurities； 2. Select the appropriate type and specification of molecular sieve; 3A-type molecular sieves are commonly used to absorb moisture from natural gas ； 3. Design an appropriate structure and specifications for the adsorption tower, taking into account factors such as adsorption efficiency, pressure drop, and flow rate ； 4. Determine the number of adsorption towers by taking into account factors such as treatment capacity, stability requirements, and backup needs. For heating and regeneration as well as cooling, steam or hot water is generally used for heating in order to regenerate the adsorbent, while inert gases such as air or nitrogen are used for cooling, so that the regenerated molecular sieve can once again absorb moisture from natural gas. The specific operating steps and parameter settings need to be determined based on the actual conditions and equipment requirements. .