Infrared thermal imaging temperature measurement and analysis system

Thread Content

The infrared thermal imaging temperature measurement and analysis system is a real-time monitoring system that integrates visible light, infrared thermal imaging, and embedded processing technologies. It is capable of analyzing the acquired visible light videos and infrared thermal images to accurately detect changes in the surface temperature of the target as well as the distribution of hot spots. It can also analyze temperature trends, identify potential areas with abnormal temperatures, and generate corresponding reports on temperature changes. When the temperature exceeds a set threshold, the system can emit an alarm signal, thereby enabling monitoring of the temperature conditions in the monitored area and facilitating functions such as early warning of thermal faults and detection of defects. ● It features high-speed surface scanning for temperature measurement and high precision in pan-tilt positioning, as well as a preset position calibration function to reduce cumulative errors during cruising. ● It holds Ex d IIC T6 Gb explosion-proof certification (number: CNEx19.1888X), offering high stability, reliability, and safety. ● It uses an electric focus lens, offering high temperature measurement accuracy and high spatial resolution. ● The scanning window is made of infrared crystal material, which is resistant to high temperatures, corrosion, and weathering. ● Infrared windows feature high hardness, high transmittance, easy maintenance, and a long service life. ● It can operate independently or in conjunction with fire protection and programmable control systems. ● It supports seamless switching between manual operation and automatic inspection modes. ● Data from each measurement scanning cycle is saved at scheduled intervals; for data stored over a long period, it is possible to retrieve historical data at any desired time point. ● It provides a Modbus communication interface to output real-time temperature data. ● Signal transmission via optical fiber to avoid interference, with a universal protocol for easy networking. The infrared thermal imager has a resolution of 384×288 or 640×512 (multiple options available). The temperature measurement range is from -20°C to 150°C or from 0°C to 550°C (customizable). The temperature measurement error is ±2°C or ±2% of the reading. The frame rate is ≥25fps. The field of view of the thermal imaging lens is 25°×19° (multiple options available), with a depth of field ranging from 0.1m to infinity. The resolution of the visible light camera is 1920×1080, and the lens has a 30x optical zoom capability. The minimum illumination required is 0.01 Lux for color images and 0.001 Lux for black-and-white images. The explosion-proof pan head can rotate horizontally from 0° to 360° and vertically from -90° to 0°. There are ≥80 preset positions available. The explosion-proof rating is Ex d IIC T6 Gb, while the protection rating is IP66. It can be installed either on the ceiling or using wall or pole mounts. The suitable operating conditions are a working temperature of -20°C to 50°C and a humidity level of ≤90%, without condensation. The power supply requirements are AC220V±10%, with a maximum current of 1A