flow rate
Thread Content
The flow rate of the water in the jacket circulation is generally 1.5 m3/s; for cold ethylene glycol solutions at 55%~60%, it is also around 1.5 m3/s. The flow rate of steam is typically 15 m3/s, while that of heat transfer oil is about 1.0 m3/s. The normal operating range for the control valve’s opening is between 2/3 and 3/4
The flow rate of the jacket circulating water and cold ethylene glycol solution is usually 1.5 cubic meters per second, the flow rate of steam is generally 15 cubic meters per second, and the flow rate of heat transfer oil is approximately 1.0 cubic meters per second. The normal opening degree of a control valve is generally between 2/3 and 3/4. .
Shouldn’t this flow rate unit be in m/s?