How is the approximate flow rate of a reciprocating compressor calculated?
Thread Content
The unit’s purification flow rate is inaccurate; how to calculate it for a reciprocating compressor of the 6md32-390/25 model?
I recommend a reference book, \"Principles of Chemical Engineering\".
Only with inlet and exhaust pressures can the cylinder diameter be recalculated
Please provide the speed, stroke, cylinder diameter, and number of compression stages from the compressor data sheet, as well as the actual operating parameters: inlet temperature and inlet and outlet pressures
If accurate data is required, it is recommended to install a flow meter
Provide the following data: rotational speed, stroke, number of compression stages, cylinder arrangement, inlet temperature, inlet and outlet pressures (indicate whether they are gauge or absolute pressure), and the diameter of each cylinder stage, and then the calculation can be done. Based on the above data, an approximate estimate can be made, as parameters such as the compressor’s clearance volume are not available, so only estimation is possible.