Regarding the oil leakage issue with the turbine bellows
Thread Content
I’m seeking advice from fellow sailors regarding the technical requirements for replacing the turbine bellows
Check whether there is oil leakage due to a poor seal; it seems that the bellows will need to undergo specific industrial treatment. First, it’s necessary to use a magnetic core detector or some coloring method to identify the areas that are worn out, before proceeding with any repairs
Just replace it in the original style. I don’t know what your bellows (pipe compensator) looks like; please send a photo so I can see if it has limit bolts. In the case of a positive-pressure pipeline, it restricts external expansion (to prevent excessive pressure from causing the structure to lengthen and damaging the bellows). ), without restricting the inner bolt (reduced to minimum)
I’m talking about the bellows inside the turbine, which prevent lubricant leakage