Are there any standards or guidelines for selecting dampers for the inlet and outlet of piston pumps?
Thread Content
All the pumps equipped with job numbers on this device are plunger pumps; the pressure at the inlet and outlet varies greatly. The original dampers have been removed, and the pressure gauges are severely damaged. Question: Design specifications or conventional practices for selecting dampers at the pump’s inlet and outlet
It would be better to find the original design and configuration. Or you would like to consult the pump manufacturer.
This post was last edited by wjch1012 on 2019-4-5 08:26. 1. The damper should be installed on the outlet pipe; the closer it is to the pump outlet, the better the shock-absorbing effect! 2. As required, the manufacturer’s equipment is equipped with dampers! It is equipped according to the vibration that may occur based on the pump model!