Nitrogen seal
Thread Content
The container needs to be nitrogen-sealed; there is a slight leak. If the nitrogen supply is interrupted, will air get in?
By using a self-acting control valve, a constant pressure is maintained, so even in the event of a slight leak, not much fluid will escape.
It shouldn’t, as the air moves towards the lower side.
Bring a pressure gauge to keep the pressure above 0
Is it because the container has nitrogen retention requirements? I remember there were ball valves for testing pressure. A small leak is no problem.
The poster should take a look at the relevant standard specifications: the nitrogen seal must maintain a certain pressure at all times, and a temporary piping system along with instruments such as valves and pressure gauges are required to enable continuous monitoring of the internal nitrogen pressure. Industry standards such as JBT 4711-2003 on the coating, packaging, and transportation of pressure vessels, and SHT 3074-2007 for steel pressure vessels in the petrochemical industry, all contain relevant provisions.