A wire mesh demister is to be installed inside the bedroom separator with a diameter of DN2800; what model should be used for this wire mesh demister – one with a full diameter is preferable
Thread Content
The diameter of the bedroom separator is DN2800; a wire mesh demister is installed inside it. The design pressure is relatively high, so what model of wire mesh demister should be used? Is it better to use one with a full diameter? How is the removal efficiency calculated? I hope my friends can give me some advice. Thank you!
It is related to wind speed, etc. Refer to the standard HG/T21618-1998 for \"Wire Mesh Demister\". There are process calculations inside
Generally, high pressure does not result in high gas velocities; custom solutions are needed in such cases.
I have seen horizontal tanks with a design pressure of 20 kilograms; they use the full diameter and are not standard
Professional manufacturer of wire mesh demisters; a full range of specifications and models available. 15324084440, Jiangsu – feel free to inquire for quotes
It’s best to check yourself the requirements for process parameters such as removal efficiency and pressure drop. There are specialized manufacturers of screen foam eliminators, and their products are quite mature; most of their performance parameters are standardized. Once you know your requirements clearly, you can then consult the manufacturers, and everything will fall into place.