Installation of autoclave
Thread Content
Are there any relevant standards for the spacing between adjacent kettles during the installation of autoclaves?
Generally, a passage of about 0.8m should be reserved between equipment rooms or an open maintenance space can be left according to maintenance requirements.
Equipment installation plane positioning basis: The maximum structural size of the equipment + the space required for ancillary facilities. On this basis, consider the maintenance space and operation inspection space.
If space is limited, you can leave space for the pipes and reducers on both sides to open the door.
Just leave a distance for inspection and maintenance. Looking at this picture, the two devices are installed very compactly. This autoclave uses a lot of steam.
The distance between the outer walls of two adjacent autoclaves should be about 1500mm.
Distance is generally required in building standards, but there is no requirement for distance in equipment standards.