Help needed
Thread Content
The condenser for metal vapor needs to be equipped with a safety valve. When this material comes into contact with air, it turns into metal powder; moreover, the condenser must maintain its airtightness during operation. The operating pressure is 2000 pascals, and the operating temperature is 200 degrees Celsius. The discharge diameter should be DN200–250. Could those with more experience advise me on which model of safety valve to choose? Phone 13230559073
What is the flange model of the safety valve?
The working pressure is less than 0.1 MPa – why is it necessary to install a safety valve?
Why is a safety valve needed when the pressure is so low?
Jacket leakage can generate pressure; the condenser is designed for atmospheric pressure
Install a burst disc, or add a safety valve at the far end of the burst disc
Such devices generally have a safety valve set at the gas supply pressure; it is difficult to install a relief device in this location. Whether a burst disc or a safety valve is used, it cannot guarantee 100% effectiveness.