Maintenance of RWKII-CU type screw compression condensing units
Thread Content
The RWKII-CU type screw compression condenser generally consists of a housing frame, motor drive, SmartViewll controller, cooling system, air filter, and other control components. It features a compact design, high precision in component manufacturing, as well as high efficiency, reliability, and ease of operation. However, since the product is a mechanical device, we need to pay attention to the following points during regular maintenance: 1. Check whether there are any cracks or damages on the compressor housing before turning it on. 2. Check the SmartViewll controller to see if any abnormalities are displayed. 3. Turn the machine on to check the motor, oil level, exhaust temperature and pressure, and listen for any abnormal noises. 4. Before turning the machine on each week, open the separator drain valve to discharge the condensed water and check for any leaks. 5. Regularly check the safety valves, pressure valves, air intake control valves, and the terminals of the wiring in the electrical control box, to ensure that there are no abnormalities with the cooling fans. 6. Regularly clean and tidy the cooler, and test the reliability of the safety valve. 7. Regularly replace the slide valve, heat transfer tubes, oil filter elements, oil separator elements, air intake filter elements, and lubricating oil.
With so many devices placed on the tank, aren’t you worried about vibrations?
This is an RWKII-CU type screw compression and condensation unit; the arrangement specified by the manufacturer was likely taken into account with vibration in mind. Giving it a thumbs up – let me know if you encounter any issues{:1_90:}