High-pressure hydrophobic expansion vessel
Thread Content
Who has information on Kaga hydroscopic expanders?
The function of the superheater steam trap expansion vessel, as well as the product specifications: in our company, the pressure of the superheater steam trap is between 0.5 and 1.5 MPa. The elbows are subject to severe erosion, and we want to install an expansion vessel at those elbows
What’s the traffic volume? I’ll choose a model for you
The hydrophobic flow rate is 22-30 T/H
Where has your high-grade hydrophobic material gone? Has it entered the deaerator?
Yes, two high-temperature heaters operate in series
A hydrophobic expansion vessel with a volume of 12 cubic meters and a working pressure of 1.0 MPa was selected; the water outlet has a diameter of DN200, while the flash vapor outlet has a diameter of DN150.
Are there samples and detailed parameter specifications? I’ll show them to my boss, along with specific examples
Add me on V18661606391, I’ll send it to you
With a hydrophobic expansion vessel, should it be the high-pressure heater’s hydrophobic element or the deoxygenator?