On the topic of the \"Compilation of Standards for the Classification, Grades, Technical Requirements, Packaging, Dimensions, and Allowable Deviations of Steel Products\"
Thread Content
This post was last edited by nj1952 on 2017-6-25 at 17:52. Topic: Compilation of Standards for the Classification, Grades, Technical Requirements, Packaging, Dimensions, and Allowable Deviations of Steel Products (5th Edition). Book title: Compilation of Standards for the Classification, Grades, Technical Requirements, Packaging, Dimensions, and Allowable Deviations of Steel Products (5th Edition). Author: Institute of Metallurgical Standardization, Research Institute for Information Standards in the Metallurgical Industry. Publisher: China Standards Press. Publication date: July 2012. Summary: This is the fifth edition of this compilation. A total of 61 standards and 1 industry standard, which were approved and issued by the authorities in charge of formulating standards and industry standards by the end of June 2012, have been included. These standards cover topics such as the classification of steel products, chemical compositions and their codes, methods for denoting steel product grades, technical requirements for products, sampling procedures, packaging, as well as product dimensions and allowable tolerances. This compilation is intended for technical personnel, managers, and quality inspection staff in industries such as steel, machinery, construction, shipbuilding, engineering construction, and transportation; it can also be used as a reference by sales and procurement professionals. I. Since the publication of this Standard Compilation, 12 standards have been revised (see the compilation’s table of contents for details). II. The author has prepared and attached the table of contents of the Standard Compilation on the Classification, Grades, Technical Requirements, Packaging, Dimensions, and Allowable Deviations of Steel Products (Fifth Edition) for the benefit of all netizens
This post was last edited by nj1952 on 2017-6-25 at 17:23. Table of Contents of “Compilation of Standards for Classification, Grades, Technical Requirements, Packaging, Dimensions, and Allowable Deviations of Steel Products (5th Edition)”
I. Grades, Chemical Composition, and Classification
GB/T 221-2008 Method for Designating Grades of Steel Products
GB/T 222-2006 Allowable Deviations in Chemical Composition of Finished Steel Products
GB/T 13304.1-2008 Classification of Steel – Part 1: Classification by Chemical Composition
GB/T 13304.2-2008 Classification of Steel – Part 2: Classification by Main Quality Grades and Essential Mechanical or Functional Properties
GB/T 15574-2016 Classification of Steel Products (replaces GB/T 15574-1995)
GB/T 15575-2008 Marking Codes for Steel Products
GB/T 17616-2013 Unified Numerical Code System for Grades of Iron and Steel Alloys (replaces GB/T 17616-1998)
GB/T 20566-2006 Terms Related to Steel and Alloys
GB/T 20878-2007 Grades and Chemical Composition of Stainless Steels and Heat-Resistant Steels
II. Dimensions, Weight, and Allowable Deviations
GB/T 342-1997 Dimensions, Shapes, Weights, and Allowable Deviations of Cold-Drawn Round Steel Wires, Square Steel Wires, and Hexagonal Steel Wires
GB/T 702-2008 Dimensions, Shapes, Weights, and Allowable Deviations of Hot-Rolled Steel Bars
GB/T 706-2016 Hot-Rolled Sections (replaces GB/T 706-2008)
GB/T 708-2006 Dimensions, Shapes, Weights, and Allowable Deviations of Cold-Rolled Steel Sheets and Strips
GB/T 709-2006 Dimensions, Shapes, Weights, and Allowable Deviations of Hot-Rolled Steel Sheets and Strips
GB/T 905-1994 Dimensions, Shapes, Weights, and Allowable Deviations of Cold-Drawn Round Bars, Square Bars, and Hexagonal Bars
GB/T 908-2008 Dimensions, Shapes, Weights, and Allowable Deviations of Forged Steel Bars
GB/T 6723-2008 Dimensions, Shapes, Weights, and Allowable Deviations of General-Purpose Cold-Formed Open Sections
GB/T 6726-2008 Dimensions, Shapes, Weights, and Allowable Deviations of Cold-Formed Sections for Automotive Use
GB/T 6728-2002 Dimensions, Shapes, Weights, and Allowable Deviations of Cold-Formed Hollow Sections for Structural Use
GB/T 14981-2009 Dimensions, Shapes, Weights, and Allowable Deviations of Hot-Rolled Coiled Bars
GB/T 15391-2010 Dimensions, Shapes, Weights, and Allowable Deviations of Cold-Rolled Steel Strips with Widths Less Than 600 mm
GB/T 17395-2008 Dimensions, Shapes, Weights, and Allowable Deviations of Seamless Steel Tubes
GB/T 21835-2008 Dimensions and Unit Length Weight of Welded Steel Tubes
GB/T 25052-2010 Dimensions, Shapes, Weights, and Allowable Deviations of Continuously Hot-Dip-Coated Steel Sheets and Strips
I. Grades, Chemical Composition, and Classification
GB/T 221-2008 Method for Designating Grades of Steel Products
GB/T 222-2006 Allowable Deviations in Chemical Composition of Finished Steel Products
GB/T 13304.1-2008 Classification of Steel – Part 1: Classification by Chemical Composition
GB/T 13304.2-2008 Classification of Steel – Part 2: Classification by Main Quality Grades and Essential Mechanical or Functional Properties
GB/T 15574-2016 Classification of Steel Products (replaces GB/T 15574-1995)
GB/T 15575-2008 Marking Codes for Steel Products
GB/T 17616-2013 Unified Numerical Code System for Grades of Iron and Steel Alloys (replaces GB/T 17616-1998)
GB/T 20566-2006 Terms Related to Steel and Alloys
GB/T 20878-2007 Grades and Chemical Composition of Stainless Steels and Heat-Resistant Steels
II. Dimensions, Weight, and Allowable Deviations
GB/T 342-1997 Dimensions, Shapes, Weights, and Allowable Deviations of Cold-Drawn Round Steel Wires, Square Steel Wires, and Hexagonal Steel Wires
GB/T 702-2008 Dimensions, Shapes, Weights, and Allowable Deviations of Hot-Rolled Steel Bars
GB/T 706-2016 Hot-Rolled Sections (replaces GB/T 706-2008)
GB/T 708-2006 Dimensions, Shapes, Weights, and Allowable Deviations of Cold-Rolled Steel Sheets and Strips
GB/T 709-2006 Dimensions, Shapes, Weights, and Allowable Deviations of Hot-Rolled Steel Sheets and Strips
GB/T 905-1994 Dimensions, Shapes, Weights, and Allowable Deviations of Cold-Drawn Round Bars, Square Bars, and Hexagonal Bars
GB/T 908-2008 Dimensions, Shapes, Weights, and Allowable Deviations of Forged Steel Bars
GB/T 6723-2008 Dimensions, Shapes, Weights, and Allowable Deviations of General-Purpose Cold-Formed Open Sections
GB/T 6726-2008 Dimensions, Shapes, Weights, and Allowable Deviations of Cold-Formed Sections for Automotive Use
GB/T 6728-2002 Dimensions, Shapes, Weights, and Allowable Deviations of Cold-Formed Hollow Sections for Structural Use
GB/T 14981-2009 Dimensions, Shapes, Weights, and Allowable Deviations of Hot-Rolled Coiled Bars
GB/T 15391-2010 Dimensions, Shapes, Weights, and Allowable Deviations of Cold-Rolled Steel Strips with Widths Less Than 600 mm
GB/T 17395-2008 Dimensions, Shapes, Weights, and Allowable Deviations of Seamless Steel Tubes
GB/T 21835-2008 Dimensions and Unit Length Weight of Welded Steel Tubes
GB/T 25052-2010 Dimensions, Shapes, Weights, and Allowable Deviations of Continuously Hot-Dip-Coated Steel Sheets and Strips
This post was last edited by nj1952 on 2017-6-25 at 17:23.
III. Technical specifications
GB/T 699-2015 High-quality carbon structural steel (replaces GB/T 699-1999)
GB/T 700-2006 Carbon structural steel
GB 712-2011 Structural steel for ships and offshore engineering
GB/T 714-2015 Structural steel for bridges (replaces GB/T 714-2008)
GB/T 1220-2007 Stainless steel bars
GB/T 1221-2007 Heat-resistant steel bars
GB/T 1222-2016 Spring steel (replaces GB/T 1222-2007)
GB/T 1298-2008 Carbon tool steel
GB/T 1299-2014 Tool and die steel (replaces GB/T 1299-2000)
GB/T 1591-2008 Low-alloy high-strength structural steel
GB/T 3077-2015 Alloy structural steel (replaces GB/T 3077-1999)
GB/T 3078-2008 Cold-rolled high-quality structural steel
GB/T 3086-2008 High-carbon chromium stainless bearing steel
GB/T 3203-1982 Technical specifications for carburized bearing steel
GB/T 4171-2008 Weather-resistant structural steel
GB/T 5216-2014 Structural steel ensuring hardenability (replaces GB/T 5216-2004)
GB/T 6478-2015 Steel for cold heading and cold extrusion (replaces GB/T 6478-2001)
GB/T 8731-2008 Free-cutting structural steel
GB/T 9943-2008 High-speed tool steel
GB/T 10560-2008 Steel for high-strength mining chain rings
GB/T 12773-2008 Steel and alloy bars for internal combustion engine valves
GB/T 14292-1993 Technical specifications for hot-rolled bars of carbon structural steel and low-heat-alloy structural steel
GB/T 14977-2008 General requirements for the surface quality of hot-rolled steel plates
GB/T 15712-2016 Non-quenched and tempered mechanical structural steel (replaces GB/T 15712-2008)
GB/T 18254-2016 High-carbon chromium bearing steel (replaces GB/T 18254-2002)
GB/T 24594-2009 High-quality alloy die steel
GB/T 24595-2009 Steel bars for forged automobile crankshafts
IV. Sampling, acceptance, packaging, and marking
GB/T 247-2008 General provisions for packaging, marking, and quality certificates of steel plates and strips
GB/T 2101-2008 General provisions for acceptance, packaging, marking, and quality certificates of section steel
GB/T 2102-2006 Acceptance, packaging, marking, and quality certificates of steel pipes
GB/T 2103-2008 General provisions for acceptance, packaging, marking, and quality certificates of steel wires
GB/T 2104-2008 General provisions for packaging, marking, and quality certificates of steel ropes
GB/T 2975-1998 Sampling locations and specimen preparation for mechanical property testing of steel and steel products
GB/T 17505-2016 General technical requirements for delivery of steel and steel products (replaces GB/T 17505-1998)
GB/T 18253-2000 Types of inspection documents for steel and steel products
GB/T 20066-2006 Methods for sampling and specimen preparation for determining chemical composition of steel and iron
GB/T 21965-2008 Steel ropes – Acceptance and terms for defects
YB/T 5056-1993 Inspection of steel nails – General requirements for packaging, marking, quality certificates, and storage and transportation
III. Technical specifications
GB/T 699-2015 High-quality carbon structural steel (replaces GB/T 699-1999)
GB/T 700-2006 Carbon structural steel
GB 712-2011 Structural steel for ships and offshore engineering
GB/T 714-2015 Structural steel for bridges (replaces GB/T 714-2008)
GB/T 1220-2007 Stainless steel bars
GB/T 1221-2007 Heat-resistant steel bars
GB/T 1222-2016 Spring steel (replaces GB/T 1222-2007)
GB/T 1298-2008 Carbon tool steel
GB/T 1299-2014 Tool and die steel (replaces GB/T 1299-2000)
GB/T 1591-2008 Low-alloy high-strength structural steel
GB/T 3077-2015 Alloy structural steel (replaces GB/T 3077-1999)
GB/T 3078-2008 Cold-rolled high-quality structural steel
GB/T 3086-2008 High-carbon chromium stainless bearing steel
GB/T 3203-1982 Technical specifications for carburized bearing steel
GB/T 4171-2008 Weather-resistant structural steel
GB/T 5216-2014 Structural steel ensuring hardenability (replaces GB/T 5216-2004)
GB/T 6478-2015 Steel for cold heading and cold extrusion (replaces GB/T 6478-2001)
GB/T 8731-2008 Free-cutting structural steel
GB/T 9943-2008 High-speed tool steel
GB/T 10560-2008 Steel for high-strength mining chain rings
GB/T 12773-2008 Steel and alloy bars for internal combustion engine valves
GB/T 14292-1993 Technical specifications for hot-rolled bars of carbon structural steel and low-heat-alloy structural steel
GB/T 14977-2008 General requirements for the surface quality of hot-rolled steel plates
GB/T 15712-2016 Non-quenched and tempered mechanical structural steel (replaces GB/T 15712-2008)
GB/T 18254-2016 High-carbon chromium bearing steel (replaces GB/T 18254-2002)
GB/T 24594-2009 High-quality alloy die steel
GB/T 24595-2009 Steel bars for forged automobile crankshafts
IV. Sampling, acceptance, packaging, and marking
GB/T 247-2008 General provisions for packaging, marking, and quality certificates of steel plates and strips
GB/T 2101-2008 General provisions for acceptance, packaging, marking, and quality certificates of section steel
GB/T 2102-2006 Acceptance, packaging, marking, and quality certificates of steel pipes
GB/T 2103-2008 General provisions for acceptance, packaging, marking, and quality certificates of steel wires
GB/T 2104-2008 General provisions for packaging, marking, and quality certificates of steel ropes
GB/T 2975-1998 Sampling locations and specimen preparation for mechanical property testing of steel and steel products
GB/T 17505-2016 General technical requirements for delivery of steel and steel products (replaces GB/T 17505-1998)
GB/T 18253-2000 Types of inspection documents for steel and steel products
GB/T 20066-2006 Methods for sampling and specimen preparation for determining chemical composition of steel and iron
GB/T 21965-2008 Steel ropes – Acceptance and terms for defects
YB/T 5056-1993 Inspection of steel nails – General requirements for packaging, marking, quality certificates, and storage and transportation