Thread Content
How to choose the right plastic chain plates for a chain conveyor? Chain plate conveyors are used in many industries, such as those dealing with beverages or cosmetics, as transportation is required in numerous processing steps. These conveyors offer high performance, but they still need to be maintained during use. Below are the methods for maintaining chain plate conveyors. 1. Chain plates of chain conveyor systems of different models cannot be connected together; it is not advisable to use them indiscriminately in order to save money, as this not only affects operational efficiency but also easily damages the chain plates. II. There are also methods for connecting chain plates of the same model; for example, using splicing is a way that can ensure good performance. III. If the chain plates are no longer in use, they must be stored properly: roll them up and keep them in a dry place; they should not be left lying around carelessly. Folding it carelessly is also wrong, as it can easily get damaged. IV. When in use, the chain plates should not be placed too close to acidic substances. If it rains, they must not be used in rainy conditions, nor in environments with strong light, as these conditions can damage them and cause corrosion. V. Plastic chain plates also have specific requirements regarding the storage temperature; it cannot be too low nor too high. The temperature should be no lower than 18 degrees and no higher than 40 degrees – such temperatures are suitable for storage. VI. The humidity in the storage environment for plastic chain plates should not exceed 80%, nor should it be lower than 50%. A storage environment with high temperatures and high humidity will reduce their service life. Even if they are stored without being used, after being left there for some time they can no longer be used – they get damaged. Therefore, plastic chain plates should be stored as required, and proper maintenance should be carried out when using them, so that they can last longer and ensure that the plastic chain plates can function properly to support production. The conveying capacity of plastic chain plates is on par with that of flat-top chains; it can also be used to transport slightly heavier items, offering a high load-bearing capacity. The conveyor belt manufacturer tells you that its speed is very stable, and it is fast and accurate, enabling synchronized conveying – something that traditional equipment could not achieve. It is highly advanced and offers excellent performance. Since plastic chain plates have been purchased, it should enable faster production, help ensure profits, reduce maintenance costs, and cut down on the need for labor.