On the topic of \"Compilation of Standards for Plastic Pipes (Test Methods Volume)\\"
Thread Content
On the topic of \"Compilation of Standards for Plastic Pipes (Test Methods Volume)\": Book title: Compilation of Standards for Plastic Pipes (Test Methods Volume); Author: Second Editing Department, China Standards Press; Publisher: China Standards Press; Publication date: May 2010. Overview: Plastic pipes are favored in the pipeline engineering industry due to their lightweight nature, corrosion resistance, low water flow loss, and ease of installation. Compared to traditional metal pipes, plastic pipes require less energy for production and cause less environmental pollution, which has led to increasing attention from ** and related industries. Over the past 10 years, China’s plastic pipe industry has developed at an extremely rapid pace; currently, its production volume is second in the world, only behind that of the United States. The application areas of plastic pipes have expanded to various sectors such as construction, municipal services, communications, industry, and agriculture. China’s plastic pipeline technology continues to innovate in all aspects, from basic theories to product standards and testing standards. All stages of plastic pipe production should be carried out in accordance with standards, and the role of these standards in production must be continuously strengthened. To further address the practical difficulties faced by relevant manufacturing enterprises, research institutions, and other organizations, such as the lack of standards and incomplete standard collections, China Standards Press has specially compiled the \"Compilation of Plastic Pipe Standards\", which is divided into product volumes and test method volumes. This book is the \"Compilation of Standards for Plastic Pipes – Test Methods Volume\", which gathers the **standards** related to plastic pipes that were issued by the end of January 2010; in total, there are 51 such standards and 1 standard amendment. These include standards for test methods such as polyvinyl chloride pipes, polyethylene pipes, thermosetting plastics, and thermoplastics. I. Since the publication of this Standard Compilation, 4 standards have been revised: GB/T 5563-2013 Rubber and plastic hoses and hose assemblies – Methods for hydrostatic testing (replacing GB/T 5563-2006); GB/T 5567-2013 Rubber and plastic hoses and hose assemblies – Determination of vacuum resistance (replacing GB/T 5567-2006); GB/T 5568-2013 Rubber or plastic hoses and hose assemblies – Hydrodynamic pulse test without bending (replacing GB/T 5568-2006); GB/T 9647-2015 Thermoplastic pipes – Determination of ring stiffness (replacing GB/T 9647-2003). II. The author has attached the table of contents of the Plastic Pipe Standards Compilation (Test Methods Volume) for the benefit of all readers
This post was last edited by nj1952 on 2017-6-25 at 13:04. Table of Contents of “Compilation of Standards for Plastic Pipes (Test Methods Volume)”
Part I: Basic Standards
GB/T 1047-2005 Definition and selection of DN (nominal size) for pipe components
GB/T 1048-2005 Definition and selection of PN (nominal pressure) for pipe components
GB/T 8174-2008 Testing and evaluation of the thermal insulation performance of equipment and pipes
GB/T 8175-2008 Guidelines for the thermal insulation design of equipment and pipes
GB/T 8806-2008 Determination of the dimensions of plastic components in plastic pipe systems
GB/T 14812-2008 Test methods for the heat transfer performance of heat pipes
GB/T 14813-2008 Test methods for the service life of heat pipes
Part II: Polyvinyl Chloride Pipes
GB/T 8801-2007 Drop test method for fittings made of rigid polyvinyl chloride (PVC-U)
GB/T 8803-2001 Heat oven test method for fittings made of injection-molded rigid polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C), acrylonitrile-butadiene-styrene terpolymer (ABS), and acrylonitrile-styrene-acrylate terpolymer (ASA)
GB/T 13021-1991 Determination of carbon black content in polyethylene pipes and fittings (thermal gravimetric method)
GB/T 13526-2007 Dichloromethane immersion test method for rigid polyvinyl chloride (PVC-U) pipes
GB/T 19471.1-2004 Test method for the negative pressure sealing performance of elastic seal ring-type socket joints for rigid polyvinyl chloride (PVC-U) pipes in plastic pipe systems
GB/T 19471.2-2004 Test method for the positive pressure sealing performance of elastic seal ring-type socket joints for rigid polyvinyl chloride (PVC-U) pipes in plastic pipe systems
Part III: Polyethylene Pipes
GB/T 15819-2006 Test methods and technical requirements for assessing the susceptibility to environmental stress cracking caused by insert-type fittings in polyethylene (PE) pipes used for irrigation
GB/T 15820-1995 Pull-out resistance test for connections between polyethylene pressure pipes and fittings
GB/T 17391-1998 Test method for the thermal stability of polyethylene pipes and fittings
GB/T 18474-2001 Test method for determining the degree of cross-linking in cross-linked polyethylene (PE-X) pipes and fittings
GB/T 19279-2003 Cone test method for evaluating the resistance of polyethylene pipes to slow crack growth
GB/T 19712-2005 Impact resistance test method for polyethylene (PE) saddle-type bypasses in plastic pipes and fittings
GB/T 19806-2005 Extrusion peel test method for electrofusion fittings of polyethylene in plastic pipes and fittings
GB/T 19808-2005 Tensile peel test method for electrofusion fittings of polyethylene with a nominal outer diameter of 90 mm or more in plastic pipes and fittings
GB/T 19810-2005 Determination of tensile strength and failure mode of electrofusion butt joints for polyethylene (PE) pipes and fittings
Part IV: Thermosetting Plastics
GB/T 5349-2005 Test method for the axial tensile properties of fiber-reinforced thermosetting plastic pipes
GB/T 5350-2005 Test method for the axial compressive properties of fiber-reinforced thermosetting plastic pipes
GB/T 5351-2005 Test method for the short-term hydrostatic failure pressure of fiber-reinforced thermosetting plastic pipes
GB/T 5352-2005 Test method for the external load performance of fiber-reinforced thermosetting plastic pipes under parallel plate conditions
Part I: Basic Standards
GB/T 1047-2005 Definition and selection of DN (nominal size) for pipe components
GB/T 1048-2005 Definition and selection of PN (nominal pressure) for pipe components
GB/T 8174-2008 Testing and evaluation of the thermal insulation performance of equipment and pipes
GB/T 8175-2008 Guidelines for the thermal insulation design of equipment and pipes
GB/T 8806-2008 Determination of the dimensions of plastic components in plastic pipe systems
GB/T 14812-2008 Test methods for the heat transfer performance of heat pipes
GB/T 14813-2008 Test methods for the service life of heat pipes
Part II: Polyvinyl Chloride Pipes
GB/T 8801-2007 Drop test method for fittings made of rigid polyvinyl chloride (PVC-U)
GB/T 8803-2001 Heat oven test method for fittings made of injection-molded rigid polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C), acrylonitrile-butadiene-styrene terpolymer (ABS), and acrylonitrile-styrene-acrylate terpolymer (ASA)
GB/T 13021-1991 Determination of carbon black content in polyethylene pipes and fittings (thermal gravimetric method)
GB/T 13526-2007 Dichloromethane immersion test method for rigid polyvinyl chloride (PVC-U) pipes
GB/T 19471.1-2004 Test method for the negative pressure sealing performance of elastic seal ring-type socket joints for rigid polyvinyl chloride (PVC-U) pipes in plastic pipe systems
GB/T 19471.2-2004 Test method for the positive pressure sealing performance of elastic seal ring-type socket joints for rigid polyvinyl chloride (PVC-U) pipes in plastic pipe systems
Part III: Polyethylene Pipes
GB/T 15819-2006 Test methods and technical requirements for assessing the susceptibility to environmental stress cracking caused by insert-type fittings in polyethylene (PE) pipes used for irrigation
GB/T 15820-1995 Pull-out resistance test for connections between polyethylene pressure pipes and fittings
GB/T 17391-1998 Test method for the thermal stability of polyethylene pipes and fittings
GB/T 18474-2001 Test method for determining the degree of cross-linking in cross-linked polyethylene (PE-X) pipes and fittings
GB/T 19279-2003 Cone test method for evaluating the resistance of polyethylene pipes to slow crack growth
GB/T 19712-2005 Impact resistance test method for polyethylene (PE) saddle-type bypasses in plastic pipes and fittings
GB/T 19806-2005 Extrusion peel test method for electrofusion fittings of polyethylene in plastic pipes and fittings
GB/T 19808-2005 Tensile peel test method for electrofusion fittings of polyethylene with a nominal outer diameter of 90 mm or more in plastic pipes and fittings
GB/T 19810-2005 Determination of tensile strength and failure mode of electrofusion butt joints for polyethylene (PE) pipes and fittings
Part IV: Thermosetting Plastics
GB/T 5349-2005 Test method for the axial tensile properties of fiber-reinforced thermosetting plastic pipes
GB/T 5350-2005 Test method for the axial compressive properties of fiber-reinforced thermosetting plastic pipes
GB/T 5351-2005 Test method for the short-term hydrostatic failure pressure of fiber-reinforced thermosetting plastic pipes
GB/T 5352-2005 Test method for the external load performance of fiber-reinforced thermosetting plastic pipes under parallel plate conditions
This post was last edited by nj1952 on 2017-6-25 at 13:04.
Part V: Thermoplastic pipes
GB/T 4217-2008 – Thermoplastic pipes for fluid transport – Nominal outer diameter and nominal pressure
GB/T 6111-2003 – Method for testing the resistance of thermoplastic pipes for fluid transport to internal pressure
GB/T 6671-2001 – Determination of the longitudinal shrinkage rate of thermoplastic pipes
GB/T 6671-2001 – Amendment 1 to “Determination of the longitudinal shrinkage rate of thermoplastic pipes”
GB/T 8802-2001 – Thermoplastic pipes and fittings – Determination of Vicat softening temperature
GB/T 8804.1-2003 – Thermoplastic pipes – Determination of tensile properties – Part 1: General rules for test methods
GB/T 8804.2-2003 – Thermoplastic pipes – Determination of tensile properties – Part 2: Pipes made of rigid polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C) and high-impact polyvinyl chloride (PVC-HI)
GB/T 8804.3-2003 – Thermoplastic pipes – Determination of tensile properties – Part 3: Polyolefin pipes
GB/T 9647-2015 – Thermoplastic pipes – Determination of ring stiffness
GB/T 14152-2001 – Method for testing the resistance of thermoplastic pipes to external impact – Clockwise rotation method
GB/T 18042-2000 – Method for testing the creep ratio of thermoplastic pipes
GB/T 18252-2008 – Plastic piping systems – Determination of the long-term hydrostatic strength of thermoplastic materials in pipe form using extrapolation methods
GB/T 18743-2002 – Thermoplastic pipes for fluid transport – Method for impact testing using a simply supported beam
GB/T 19280-2003 – Thermoplastic pipes for fluid transport – Determination of resistance to rapid crack propagation (RCP) – Small-scale steady-state test (S4 test)
Part VI: Others
GB/T 5563-2013 – Rubber and plastic hoses and hose assemblies – Method for hydrostatic testing
GB/T 5564-2006 – Low-temperature bending test for rubber and plastic hoses
GB/T 5565-2006 – Bending test for rubber or plastic-reinforced hoses and unreinforced hoses
GB/T 5566-2003 – Method for testing the resistance of rubber or plastic hoses to flattening
GB/T 5567-2013 – Rubber and plastic hoses and hose assemblies – Determination of vacuum resistance
GB/T 5568-2013 – Rubber or plastic hoses and hose assemblies – Hydrostatic pulse test without bending
GB/T 15560-1995 – Method for hydraulic instantaneous burst and pressure resistance testing of plastic pipes for fluid transport
GB/T 18251-2000 – Method for determining the dispersion of pigments or carbon black in polyolefin pipes, fittings and blends
GB/T 18476-2001 – Polyolefin pipes for fluid transport – Determination of crack propagation resistance – Test method for slow crack growth in notched pipes (notch test)
GB/T 21300-2007 – Determination of light transmittance of plastic pipes and fittings
GB/T 23241-2009 – Basic parameters and technical requirements for plastic pipes and fittings used in irrigation
Part V: Thermoplastic pipes
GB/T 4217-2008 – Thermoplastic pipes for fluid transport – Nominal outer diameter and nominal pressure
GB/T 6111-2003 – Method for testing the resistance of thermoplastic pipes for fluid transport to internal pressure
GB/T 6671-2001 – Determination of the longitudinal shrinkage rate of thermoplastic pipes
GB/T 6671-2001 – Amendment 1 to “Determination of the longitudinal shrinkage rate of thermoplastic pipes”
GB/T 8802-2001 – Thermoplastic pipes and fittings – Determination of Vicat softening temperature
GB/T 8804.1-2003 – Thermoplastic pipes – Determination of tensile properties – Part 1: General rules for test methods
GB/T 8804.2-2003 – Thermoplastic pipes – Determination of tensile properties – Part 2: Pipes made of rigid polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C) and high-impact polyvinyl chloride (PVC-HI)
GB/T 8804.3-2003 – Thermoplastic pipes – Determination of tensile properties – Part 3: Polyolefin pipes
GB/T 9647-2015 – Thermoplastic pipes – Determination of ring stiffness
GB/T 14152-2001 – Method for testing the resistance of thermoplastic pipes to external impact – Clockwise rotation method
GB/T 18042-2000 – Method for testing the creep ratio of thermoplastic pipes
GB/T 18252-2008 – Plastic piping systems – Determination of the long-term hydrostatic strength of thermoplastic materials in pipe form using extrapolation methods
GB/T 18743-2002 – Thermoplastic pipes for fluid transport – Method for impact testing using a simply supported beam
GB/T 19280-2003 – Thermoplastic pipes for fluid transport – Determination of resistance to rapid crack propagation (RCP) – Small-scale steady-state test (S4 test)
Part VI: Others
GB/T 5563-2013 – Rubber and plastic hoses and hose assemblies – Method for hydrostatic testing
GB/T 5564-2006 – Low-temperature bending test for rubber and plastic hoses
GB/T 5565-2006 – Bending test for rubber or plastic-reinforced hoses and unreinforced hoses
GB/T 5566-2003 – Method for testing the resistance of rubber or plastic hoses to flattening
GB/T 5567-2013 – Rubber and plastic hoses and hose assemblies – Determination of vacuum resistance
GB/T 5568-2013 – Rubber or plastic hoses and hose assemblies – Hydrostatic pulse test without bending
GB/T 15560-1995 – Method for hydraulic instantaneous burst and pressure resistance testing of plastic pipes for fluid transport
GB/T 18251-2000 – Method for determining the dispersion of pigments or carbon black in polyolefin pipes, fittings and blends
GB/T 18476-2001 – Polyolefin pipes for fluid transport – Determination of crack propagation resistance – Test method for slow crack growth in notched pipes (notch test)
GB/T 21300-2007 – Determination of light transmittance of plastic pipes and fittings
GB/T 23241-2009 – Basic parameters and technical requirements for plastic pipes and fittings used in irrigation