Request to delete
Thread Content
This post was last edited by *nht1 on 2019-3-14 08:42. As the title suggests: The piping isn’t continuous; only a section of straight pipe can be drawn at a time, and elbows are not added automatically. There’s also a yellow exclamation mark in the dynamic input field. Does anyone with experience have time to offer some guidance?
By asking questions to myself, I was able to resolve the issues; is that the reason? Master, the discontinuity in the piping might be due to the piping status not being refreshed. When I used AL to select points along the pipeline, it prompted me to refresh the piping status. As for the absence of elbows, it’s possible that the project database provided by Zhongke does not contain data for such elbows; using pipes with a larger diameter allows elbows and insulation to be displayed properly. There is another issue: when stretching the pipeline, movement occurs as a result, but this problem disappears after refreshing.
I installed one, but I don’t know how to use it and don’t have time to learn*