Thread Content
When using CAD commands to create CAD drawing files, it is sometimes necessary to mark or annotate the contents of the CAD drawings, and for this purpose we use the CAD revision cloud line command in HaoChen CAD. What is a CAD revision cloud line? REVCLOUD: When examining or highlighting graphics with red lines, the REVCLOUD function can be used to highlight marks and improve work efficiency. REVCLOUD is used to create polylines made up of consecutive arcs to form cloud-like objects. Tutorial on Using Revised Cloud Lines in HaoChen CAD First, open the HaoChen CAD drawing software, click on 【Drawing】 in the menu bar, find and select 【Revised Cloud Lines】 from the dropdown list, or type REVCLOUD in the command line and press Enter to execute the command; REVCLOUD is the shortcut key for revised cloud lines. As shown in the figure below: After clicking the \"Revise Cloud Line\" command, the mouse can be used to click a point in the drawing area, move it around, and then return to the starting point to complete the cloud line drawing. After clicking the cloud line command, the input field appears: Specify start point or : Arc length: After clicking the cloud line command, enter A and press Enter, then enter the minimum arc length value and press Enter, followed by entering the maximum arc length value and pressing Enter. Note that the maximum arc length value cannot exceed three times the minimum arc length value. Then click on the drawing area and move the mouse back to the starting point to obtain the cloud line. As shown in the figure below: Object: After selecting the cloud line command, enter O and press Enter; then click on one of the arcs in the diagram. The arc will turn into a cloud line. By default, the direction remains unchanged; entering Y and pressing Enter will result in a cloud line with the reversed direction. As shown in the figure below: Style: After selecting the dashed line command, enter S and press Enter; this will prompt you to choose an arc style. Enter N and press Enter to have the dashed line drawn as a regular single line, while entering C and pressing Enter will result in a hand-drawn appearance for the dashed line. I believe that through the above explanation, everyone now has a general understanding of what CAD revision cloud lines are and how to use them; be sure to apply this knowledge in your future drawing tasks~